►PC/PET label
PC/PET label is also called graphic overlays,membrane control panel,front panel.
►Similar products
►Basic info
PC/PET label is printed on the transparent PET/PC with the designed graphics, then stuck on adhesive layer and cut into the required shape. Another way to make a PC/PET label is to emboss the designed graphic on panel. This kind of label is beautiful and decorative. Besides, it can provide graphical and written identification for human-computer interface.The graphic overlay of the machine is very important.To design a beautiful and useful panel, we should not only consider the layout of windows and keys, but also the beauty of graphics, colors and textures . From an application perspective,we need to consider whether there is special request, such as waterproof, UV protection, scratch- proof, oil-proof e.t.c. We need to choose the suitable material to achieve ideal effect.
| Printing Film |
Surface |
Thickness |
Peculiarity |
|
PET
|
Glossy(Normal,Hard coat) |
0.125/0.180mm |
•hard texture
•suitable for making poly dome
•high corrosion resistance
|
| Matt (Fine texture,Velvet) |
0.150/0.200mm |
•soft texture
•good fire resistance
•low corrosion resistance |
| PC |
Glossy(Normal,Hard coat) |
0.175/0.250/0.350/0.500/1.00mm |
| Matt (Fine texture,Velvet) |
0.175/0.250/0.370/0.500 |
Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280
►Common Materials
►Graphic overlay embossing
Graphic overlay embossing is usually used to show button position. The embossed keys have distinct 3D effect and can be easily and accurately located by the fingers. The embossing area can be designed according to the shape of the keys.
►Working temperature
-30~80℃
►Mount Guidance
①Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
②Compare the panel size with the paste area and confirm the direction.
③Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
④If you fail to mount the panel in one time, tear off the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.
