White graphic overlay with 1mm PC board

Name: White graphic overlay with 1mm PC board
Brand: FLEXKYS
Availability: InStock
Rating: 5 (1 reviews)

Brand:FLEXKYS
Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery time: 12~15 Working Days

INQUIRY

Description

►Product name: White graphic overlay with 1mm PC board

►Specification
Size: 90*165mm
Graphic overlay: Autotex F150 (0.15mm)
Rear adhesive: 3M467
Sapcer: 1mm transparent PC

►Notes
We accept artwork drawing in .ai, or PDF.
Please provide Pantone number if you have high requirement on color.
It’s free to change the printing for mass production.

Printing Film	Surface	Thickness	Peculiarity
PET	Glossy(Normal,Hard coat)	0.125/0.180mm	•hard texture •suitable for making poly dome •high corrosion resistance
PET	Matt (Fine texture,Velvet)	0.150/0.200mm	•soft texture •good fire resistance •low corrosion resistance
PC	Glossy(Normal,Hard coat)	0.175/0.250/0.350/0.500/1.00mm
PC	Matt (Fine texture,Velvet)	0.175/0.250/0.370/0.500

Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280

►Common Materials

►Panel Mount Guidance
①Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
②Compare the panel size with the paste area and confirm the direction.
③Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
④If you fail to mount the panel in one time, tear off the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.

►We can offer special 3D texture pannel as followed

Review

Force Sensing Resistor

Seat Sensor

Membrane Switch

IMD/IML Plastic Injection

Film Heater

Capacitive Foil Sensor

White graphic overlay with 1mm PC board