Glossy PC or PET film silkscreen push button membrane overlay with RGB led display window

Name: Glossy PC or PET film silkscreen push button membrane overlay with RGB led display window
Brand: FLEXKYS
Availability: InStock
Rating: 5 (1 reviews)

Brand:FLEXKYS
Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery time: 12~15 Working Days

INQUIRY

Description

►Product name: Glossy PC or PET film silkscreen push button membrane overlay with RGB led display window

►Keyword: Push button graphic overlay ,gloss PET film overlay,one button membrane sticker ,white membrane label ,black faceplate sticker,membrane overlay,silkscreen graphic overlay.

►Specification
①Graphic overlay: PET0.188mm GLOSS
②Back adhesive: 3M 468 (0.1mm)
③Button/Key:
- Convex shape: Dome
- Diameter: 10mm
- Height: 0.4 mm
④Display window: trasparent for Led 80%

Description:
It is used on handheld wireless notification button. The surface is gloss and anti-scratches. It needs to be covered with protective film when shipping.

►Application
Push Button

The MDX-SB01 is an IoT (Internet of Things) handheld wireless notification button. This battery powered electronic device that can be useful to signal events to a cloud server and then to a person or organization. The wireless transmission uses the Sigfox network.

It is composed by an electronic board with:

● A push button with one or two button presses

● RGB led for user feedback

● STM32L0 low power microcontroller from ST Microelectronics - ARM Cortex M0+ 32 bit MCU

● S2-LP sub-1GHz transceiver from ST Microelectronics for Sigfox radio transmission

The button overlay can be customized to suit user’s needs. The device is powered by 2 AAA non rechargeable Lithium batteries that guarantee years of operation (depending on the number of button pressions/transmissions). The batteries can be changed by the user when needed (Lithium Micro AAA Energizer L92) The MDX-SB01 device is a Sigfox RC1 radio class device.

The device is shipped with batteries disabled to conserve energy when the product is stocked. It is powered on by pressing the button, than remains active. Confirms power on by flashing the red led once. When pressing the button the device blue led blinks every 5 seconds. The device can be powered down by pressing the button until the blue led blinks two times. The device confirms power down flashing the blue led 5 times.

The above product information is for reference only, we can provide customized production according to the design requirements of customers.
Optional material for panel: (1)PET (2)PC (3)PMMA ,thickness from 0.13~2.0mm

Printing Film	Surface	Thickness	Peculiarity
PET	Glossy(Normal,Hard coat)	0.125/0.180mm	•hard texture •suitable for making poly dome •high corrosion resistance
PET	Matt (Fine texture,Velvet)	0.150/0.200mm	•soft texture •good fire resistance •low corrosion resistance
PC	Glossy(Normal,Hard coat)	0.175/0.250/0.350/0.500/1.00mm
PC	Matt (Fine texture,Velvet)	0.175/0.250/0.370/0.500

Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280

►Common Materials

►Panel Mount Guidance
①Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
②Compare the panel size with the paste area and confirm the direction.
③Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
④If you fail to mount the panel in one time, tear off the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.

►We can offer special 3D texture pannel as followed

Review

Force Sensing Resistor

Seat Sensor

Membrane Switch

IMD/IML Plastic Injection

Film Heater

Capacitive Foil Sensor

Glossy PC or PET film silkscreen push button membrane overlay with RGB led display window