Products

Force Sensing Resistor

Seat Sensor

Membrane Switch

Metal Dome Membrane Switch Poly Dome Membrane Switch Waterproof Membrane Switch Graphic Overlay Membrane Switch with LED Capacitive Touch Switch FPC Membrane Switch PCB Membrane Switch Backlit Membrane Switch Shielding Layer Membrane Switch Microwave Oven Membrane Switch Safes Membrane Switch Fuel Dispenser Membrane Switch

IMD/IML Plastic Injection

Household Appliances Panel

Film Heater

Capacitive Foil Sensor

Polyester graphic overlay sticker hermetic casing panel IP65
Polyester graphic overlay sticker hermetic casing panel IP65 Polyester graphic overlay sticker hermetic casing panel IP65 Polyester graphic overlay sticker hermetic casing panel IP65

Polyester graphic overlay sticker hermetic casing panel IP65

Brand:FLEXKYS
Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery time: 12~15 Working Days
INQUIRY
Description
►Product name: Polyester graphic overlay sticker hermetic casing panel IP65

►Keyword: graphic overlay,Polyester graphic overlay,graphic overlay sticker,graphic overlay panel


►Specification
Autotex F200
3M468 Matt Pillow embossed
Dimension: 73*113mm



►Application

This sticker is used on temperature regulators, which are microprocessor-based, programmable controllers, intended to be used in milk coolers. Those regulators are placed in a small hermetic casing panel (IP65) to hang out and equipped in outputs derived through the cables.
 
Due to universality of these regulators there are also other possibilities of their application. An example of another using is the ability to set the regulator as a heating regulator and adapt him to control the heating system. In this case, there is additional possible, that the controlling of ventilators can be used (use - in dryers).
 
 
Printing Film Surface Thickness Peculiarity
PET
 Glossy(Normal,Hard coat) 0.125/0.180mm
•hard texture
•suitable for making poly dome
•high corrosion resistance
Matt (Fine texture,Velvet) 0.150/0.200mm •soft texture
•good fire resistance
•low corrosion resistance
PC Glossy(Normal,Hard coat) 0.175/0.250/0.350/0.500/1.00mm
Matt (Fine texture,Velvet) 0.175/0.250/0.370/0.500
Optional Rear adhesive:3M 467,3M 468,3M 200 MP,3M 300LSE,3M 9080A,3M55280

►Common Materials

►Panel Mount Guidance
①Clean up the surface where the switch is bonded and make sure it is flat ,without rust, oil and dust.
②Compare the panel size with the paste area and confirm the direction.
③Tear off a corner of the bottom release paper and locate the correct position, then slowly remove the rest release paper and flatten the panel.
④If you fail to mount the panel in one time, tear off  the panel and remount it. Please change another panel if the back adhesive is broken and clear up the paste area.

►We can offer special 3D texture pannel as followed

 
Review

1/3
X